top of page

Interior shelf storage kit

storage1.png
storage2.png
storage-installed.png

Features:

  • Constructed of durable, light-weight anodized 20 series (20mm x 20mm) aluminum extrusion 'T-slot' (*assembly required = just tightening hex bolts - all bolts/allen wrench included it's easy)

  • Units must be bolted to vehicle ceiling each kit supplied with 4 pre-drilled 1/4" top holes to bolt unit to ceiling ribs (forewarning module may not end up sitting completely level if mounting surface isn't completely flat and level; and for ceiling installs, depending where your ceiling ribs are located there may be some 'gap' along back of shelf).

  • Note: to confirm module will fit your vehicle the minimum distance ceiling ribs can be spaced apart is approx. 16" and maximum apart approx. 34" to be structurally strong and hold the maximum rated contents weight (*buyers responsible for confirming it will fit for your build before purchasing) 

  • Dimensions = 48" W  x 12.5" deep x 12" tall (*custom shelf sizes differing lengths may be available please contact us) 

  • Weight fully assembled = approx. 10 lbs.

  • Maximum rated total contents weight it can hold once properly installed = 35 lbs.

  • Add multiple shelves if need more storage

  • Approx. assembly time 2.5 hours

hole_drilled.PNG
  • Note: See image below bottom panels do not 100% fill in the bottom there are five ~ 1" gaps because ABS panels included are squared off to reduce cost; but shouldn't affect performance for storing clothes, etc.
storage1.png
up_arrow_final_left.png
up_arrow_final_left.png
up_arrow_final_left.png
up_arrow_final_left.png
up_arrow_final_left.png

What you get:

  • Pre-cut and pre-drilled aluminum extrusion 20 series needed to assemble a complete kit frame (*shipped separately directly from supplier)

  • All T-slot bolts/nuts/lock washers/brackets and allen wrench needed to assemble and install

  • 6 black ABS plastic inserts cut to fit as shown; 3 for the bottom and 3 for the back

  • Detailed instructions

What you need:

  • 4 bolts and nuts long enough to fit through your ceiling ribs and make it through the pre-drilled holes (bolt length varies with each build so buyer will have to determine and purchasee)

  • Optional to install sound dampening rubber between kit and ceiling if you don't want your ceiling material potentially scratched; buyer's choice.

rubber-strip_final.png

TOP MOUNT Shelf

$390 (plus tax)

​

Interested in purchasing? Then please contact CVK.com for current freight rates and delivery estimate; the covid supply- chain delays has delayed some parts availability now. We do our best to respond within 1 business day, thanks. 
bottom of page